analog-to-wireless converter benefts ? analog-to-wireless migration ? converts phone number to ip address ? outbound and inbound calling the multiconnect ? aw analog-to-wireless converter is a convenient turnkey solution that allows legacy equipment with built-in analog modems to connect to the cellular packet data or circuit switched data networks. by emulating the traditional dial-up pstn network and using integrated or external cellular modems, the affordable multiconnect aw converter gives new life to devices currently using traditional analog dial-up communications. housed in a rugged industrial chassis, the multiconnect aw converter operates on standards- based communication networks and can be desktop or panel mounted. features ? turnkey solution with integrated quad-band gsm/gprs modem, v.34/33.6k analog modem and slic for pstn emulation ? separate model for use with external cdma modem ? supports packet data, circuit switched data and ppp pass-through modes ? rj-11 port provides dial tone, ring, busy and dtmf detection ? supports analog modem connections from 300 baud to 33.6k bps with error correction and data compression ? serial port confguration ? rugged, industrial metal chassis ? leds for visual monitoring of power, signal strength, rs-232 and phone line status ? sma antenna connector and sim socket ? fcc, ptcrb and r&tte certifed ? desktop or panel mounting ? two-year warranty multiconnect ? aw rj-11 connection (embedded or external) multiconnect tm aw analog-to-wir eless converter cellular network legacy device with analog modem data center 60 ..... ******* 1;456 //// 09 ******* 78. 001 %__--- * 5 6 //// 0 9 * * * * * * * 7 8 . 0 0 1 % _ _ - - -
world headquarters tel: (763) 785-3500 (800) 328-9717 www.multitech.com emea headquarters multi-tech systems (emea) united kingdom tel: +(44) 118-959 7774 ordering information product description region mt100a2w-g analog-to-wireless converter C gprs global mt100a2w* analog-to-wireless converter regional * requires an external multi-tech cdma rs-232 style modem. specifcations packet data features gprs class 10, pbcch support coding schemes: cs1 to cs4 circuit switched data features asynchronous, transparent & non-transparent up to 14.4k bps, mnp2 & v.42bis connectors power: 2.5mm miniature screw sim: standard 1.8v/3v sim receptacle (-g model only) confguration: de-9 female analog modem: rj-11 external modem: de-9 male (mt100a2w only) rf antenna: 50 ohm sma (female connector, -g model only) analog interface pstn emulation - etsi es 201 970 power requirements 9v to 32vdc @ 400 ma mt100a2w-g (measured @ 9vdc) typical - 230 ma maximum - 340 ma peak - 1.43 a mt100a2w (measured @ 9vdc) typical - 156 ma maximum - 233 ma physical description 2.8" l x 7.0" w x 1.2" h; 11.5 oz. (7.1 cm x 17.8 cm x 3.0 cm; 326g) operating environment -40o to +60o c certifcations ce mark, r&tte emc: fcc part 15 class b, 22, 24; en 55022 class b, en 55024, en 301 489-1, en 301 489-7, en 301 511; rss 132, 133,102 safety: cul 60950-1, ul 60950-1; iec 60950-1 network: ptcrb, gcf copyright ? 2010 by multi-tech systems, inc. all rights reserved. 8/10 86002105 highlights applications. the multiconnect aw converter is targeted at applications that have an integrated analog modem as part of the solution, but need to utilize the cellular network for connectivity to their host application. some examples include: produced in the us of us and non-us components. features and specifcations are subject to change without notice. trademarks / registered trademarks: multiconnect, multi-tech, and the multi-tech logo: multi-tech systems, inc. / all other products and technologies are the trademarks or registered trademarks of their respective holders. ? automated teller machines (atms) ? home healthcare monitors ? security systems ? credit card/pos terminals ? kiosks ? industrial automation/utilities legacy pstn connectivity alternative. as it becomes more and more diffcult to fnd analog phone lines in homes and businesses, and analog networks are being sunset, device manufacturers are faced with a problem, fnding new ways to connect their legacy analog devices to newer digital communication networks. the multiconnect aw converter seamlessly integrates with these types of devices allowing them to connect to the cellular network without requiring any changes to the remote device. simply plug the rj-11 cable from the existing device into the multiconnect aw converter, enter a few confguration commands through the rs-232 serial port and you are ready to go. industrial chassis. the multiconnect aw converter is housed in a rugged, industrial chassis with one or two rs-232 connectors, an rj-11 connector, and can be desktop or panel mounted. in addition, numerous leds provide visual monitoring of speed, link, activity, operational status and power. it is available with ac or dc power options. firmware upgrades. features fash memory, which allows for easy frmware updates. these upgrades allow the user to stay current with the latest enhancements that multi-tech has to offer. comprehensive service and support. the multi-tech commitment to service means we provide a two-year product warranty and service that includes free technical support, 24-hour web site and ftp support.
|
